Double Layers Sandwich Paper Roll To Sheet Cutting Machine

Last Updat Time:17/11/2022

The JT-SHT-800D double layers paper roll to sheet cutting machine was introduced last year as a two-layer cross-cutting machine.

The sheet cutting machine, known as a paper sheeter, can cut A3, A4, and A5 sheets, burgers paper, hot dogs paper, sandwich wrap paper sheets, aluminum foil sheets, wax paper, butcher paper, hamburger paper, baking paper, and similar types of papers for fresh food wrapping paper.

Because the JT-SHT-800D double-layer paper sheet cutter is equipped with upper and lower two-layer unwinding racks, two mother rolls can be unloaded and fed at the same time, and the output of finished sheets is doubled compared to single-layer machines.

Many customers just saw the unique selling point and advantages of the JT-SHT-800D A4 paper cutting machine and chose to place an order for this machine, such as overseas Chinese Mr. He in Myanmar and Ghana customer Awua.

Mr. He opened a factory in Suzhou, and he is optimistic about the business opportunities in the Myanmar market.

He planned to move the Suzhou factory to Myanmar, and go there to open a factory for producing flexible packaging materials, such as aluminum foil. So they contacted us to discuss the purchasing of an aluminum foil roll to sheet cutting machine.

Because Suzhou is close to our factory location in Kunshan, Mr. He brought aluminum foil paper roll samples to our factory to discuss in detail, and request us to demonstrate the actual effect of the double-layer paper roll on A4 sheet cutting machine on site.

Aluminum foil is a very thin and light material, and the wind will be generated after each cross-cutting. In order to solve this problem, the engineers of our company specially designed the NIP plate, as shown below:

With the NIP plate, you can avoid the wind being generated during every time’s cross-cutting process, the aluminum foil sheet will not float up, and each aluminum foil sheet can be neatly stacked into a chop.

The following video is the testing video of the double-layer paper reel to sheet cutting machine. Please watch this video to see the actual effect of the machine.

Mr. He was very satisfied with the test results of the machine, so they finally paid for the JT-SHT-800D double-layer roll to sheet cutter.

With this successful case of Mr. He as an example, we bagged an order from another Ghanaian customer Mr. Awua for another JT-SHT-800D paper reel cutting machine.

Ghanaian customer Mr. Awua was originally engaged in the apparel business in Guangzhou.

He purchased second-hand apparel from China and sold it to the local market in Ghana.

But one day, he suddenly found us and said he wanted to buy a hamburger paper sheeting machine.

After contacting for a period of time, the customer took a plane directly from Guangzhou to our factory location in Kunshan for an interview.

Our boss Bruce recommended him the JT-SHT-800D double-layer roll to sheet paper cutting machine and proposed to take him to Mr. He’s factory in Suzhou. Mr. Awua could check the JT-SHT-800D double-layer A4 paper roll cutting machine’s actual working effect in Mr. He’s factory.

When Mr. Awua heard that he can view the actual use of the JT-SHT-800D double-layer cross-cutting machine, he is very happy and excited.

After watching the JT-SHT-800D automatic roll to sheet cutter in the field, Mr. Awua warmly took a joint photo with Mr. He and thanked Mr. He for opening the factory and showing the machine to him.

After returning to the Jota factory in Kunshan, Mr. Awua proposed to place an order for the double-layer hamburger paper sheeting machine JT-SHT-800D and paid a USD 3,000 cash deposit.

When the production of the double-layer hamburger paper roll sheeter machine was completed, the Ghanaian customer Mr. Awua came to Kunshan to inspect the machine and clear the balance.

Finally, he returned to Ghana with satisfaction, waiting for our shipment.

If you also want to get involved in A4 paper, hamburger paper, sandwich wrap paper, hot dog wrap paper, etc., please call us to consult Jota double-layer paper reel to sheet cutting machine, or send an inquiry on our website, and we will give you a timely response.

Hamburger Paper Roll Sheeter Machine FAQ Guide

What Is a Hamburger Paper Roll Sheeter Machine?

A hamburger paper roll sheeter machine is a machine that is used to cut large paper rolls into specific paper sheets. It is basically used to cut paper rolls into sheets. Paper sheets vary in length and width depending on your needs.

The paper roll sheeter machine uses sheeting knives.

The sheeting knives cut through an up-and-down movement. This machine is high-speed, quiet, and accurate in cutting precision. It is an ideal equipment for various large paper mill businesses.

Paper rolls are often produced in big rolls; these rolls are known as jumbo paper rolls. They are of different structures, widths, and diameter. The jumbo paper rolls are made to produce different types of products.

The roll sheeter machine can be configured to produce specific paper products. These products may include;

• Sandwich wrapping paper
• Hamburger wrapping paper
• Food packaging composite film
• Aluminum foil
• Packaging materials.
• Butcher paper wrappers
• A3 Sheets of Card
• A4, A5, A2 Paper Business

There are numerous paper sheet types that you can produce using our roll sheeter machine. The market for paper sheets is on the rise. This guarantees you returns on your investment.

The roll to sheet cutting machine is available in two distinct types.

One is the scissor-type sheeter, the cutters move up and down, and the speed is around 120cuts per min.

The other type is the rotary-type of roll sheeter machine. For the rotary type, the knife is simplex rotary or synchronized rotary. It can achieve a speed of 300 cuts /min.

You can customize your roll to sheet cutting machine to work with two rolls or more.

This means that you are able to slit and sheet different paper sizes at the same time. This saves you time and also increases your production lead times.

You will also be able to handle more customers and increase your sales revenue.

The roll to sheet machines can be categorized using different aspects. These aspects may include:

According to the cutting form

• Scissor cross-cutting
• Rotary cutting

According to the sheet finishing type

• Auto Stacking Device
• Ordinary (manual finishing)

According to the unwinding form

• Pneumatic shafted unwinding
• Hydraulic shaftless unwinding

According to the braking type

• Magnetic powder brake
• Pneumatic brake

All our roll sheeter machines are highly customizable. You can reach us and share your design ideas. Our technicians and design engineers are ready to assist you through the process.

What Are the Configurations of a Roll to Sheet Cutting Machine?

Our roll to sheet cutting machine is configured with the latest paper sheeter machine features in the market.

We ensure that we optimize our roll to sheet cutting machine to serve your needs. Some of the configurations that come with our coreless winding machines include:

Automatic counting system

Ensure that the cut sheets can be packaged immediately after slitting or being cut. The roll to sheet cutting machine is equipped with an automatic counting system.

The automatic counting system counts the cut paper sheets. It enables the roll sheeter machine to stack the correct number of paper sheets together.

Electric Circuit

The electric circuit of the paper sheets for the food-cutting machine follows all the necessary standards.

All the electric circuits are in conformity with the CE certification.

Emergency stop switch

The roll sheeter machine is also equipped with an emergency stop switch. The emergency stop switch assists to realize the emergency stop at any point of the machine.

This is an important aspect of any machine especially in avoiding further damage to the machine.

Blower

Another important configuration of the roll to sheet cutting machine is the blower. Our roll sheeter machine is equipped with an air blower to blow waste material off. It ensures that the waste does not clog the machine.

Touch Screen and Meter Counter

The roll to paper sheet cutting machine adopts Weinview PLC and Touch Screen and meter counter. All the working parameters can be displayed on the control monitor.

Only need to set up the material thickness and initial tension data. The Micro-computer will calculate the accord data, and keep the machine working automatically until the end.

Frequency Inverter Motor

It is also equipped with a frequency inverter motor. The frequency inverter motor is used to control the sheeting cutter movement. This ensures that the paper sheet cut is solid and stable.

Servo Motor

Our paper sheet for baking sheeter machines also adopts the Servo motor from Yaskawa for the material feeding.

The precision can be highly controlled by 0.2mm. Precision means that the paper roll sheeter machine produced will be of very high quality.

Braking System

We have also installed a braking system on our roll to sheet cutting machine.

It is equipped with an automatic braking device. It is usually a 20 kg/ m2 * 1PC to control the material feeding tension.

This ensures that your paper roll does not tear when being fed into the slitting head.

Specially treated alloy sheeting cutter

To ensure clean cuts of high quality, the paper sheets for food cutting machines are equipped with specially treated alloy sheeting cutters. This type of cutter has merit for long working life and endurance. It means you will not have to keep changing the cutter.

Automatic Tension Control

An automatic tension control system is also used on the roll to sheet cutting machine. The automatic tension control system is used to keep the material working under constant tension.

This helps to keep the parent paper roll from tearing. It also prevents the paper from crisping when cut and aids in the production of high-quality sheets.

Does The Paper Sheet for the Baking Sheeter Machine Have Printing Capability?

No, the paper sheet for the baking sheeter machine does not have printing capabilities.

To get baking paper sheets that are printed, you can feed an already printed jumbo roll on the paper sheet for the baking sheeter machine.

Another alternative will be to install a printing machine to print the already sheeted baking paper. This can be done by printing on individual baking paper sheets.

Our research and development (R&D) team is still researching the best way to integrate the printing capabilities with our roll sheeter machines.

The use of our paper sheet for the baking sheeter machine has the advantage of being equipped with a photocell for color code tracking.

The photocell for color code tracking is used in photocell tracking, which aids in the automatic cutting out of images. When you need specific shapes and sizes for your baking sheets, this function is ideal.

Why Should I Have an Understanding of How the Automatic Paper Roll to Sheet Cutting Machine Works?

At Jota Machinery, we ensure that all our roll to sheet cutting machines is optimized to meet your specific needs and wants.

We manufacture our machines with your customer in mind. That is why all our roll to sheet cutting machines are optimized to be easy to use.

To understand more about the working mechanisms of our roll sheeter machines, you need to be aware of its various sections.

Our kebab paper roll sheet machine is mainly composed of several important sections. It is important that you understand the working mechanisms of these sections.

This is vital in ensuring the safe operations of the kebab paper roll sheeter machine.

The information on the working mechanism of the roll to the sheet is important in a number of ways including;

• That you carry out the correct installation procedures for your roll to sheet cutting machine.
• That you use the correct and trained personnel for your paper roll sheeter machine.
• The information is also important in guiding you when buying a new roll sheeter machine.
• The working mechanism of the roll sheeter machine guides you when shipping your machine. This is because you will be able to guide the shippers on its handling.
• It also helps you when negotiating with us and also when placing your order.
• It is also relevant when ordering spare parts and carrying out maintenance. The information will ensure that the correct parts are replaced.

What Are the Various Sections of a Kebab Paper Roll Sheeter Machine?

The sections of the kebab paper roll cutting machine include the;

Unwinding Section

The unwinding part is the starting part of the kebab paper roll sheeter machine. Its main function is to carry the parent roll. The unwinding section of the kebab paper roll cutting machine is where the jumbo paper roll is unwound. The reason for the unwinding is to prepare the paper roll for slitting and sheeting.

Our kebab paper roll cutting machine has clamping mechanisms to hold the jumbo paper roll into place.

We also have a kebab paper roll cutting machine equipped with shafts on both ends of the roll. These shafts clamp the parent roll into place directing it into the slitter and sheeting section.

Other features in the unwinding section are unwound breaks that ensure that tension is controlled. When tension is too high, the paper roll can break or deform.

Typically, the unwind breaks are manual to give the operator greater control.

A kebab paper roll cutting machine with an automatic braking system is also available. The accurate tension of the paper yields high-quality paper sheets.

The unwinding stage also consists of an unwind stand onto which the parent roll of paper is loaded and secured. The unwinding section is equipped with spreading rollers.

These rollers hold the paper roll into place. The paper roll is held in place by the unwind stand. The unwind stand allows the paper roll to rotate by holding it into its central axis.

Web Feeding Section

Web feeding sections come in right after the unwinding section. After the parent roll is released by the unwinding part, material feeding starts. Our paper sheets for food cutting machine are installed with a pneumatic control.

The pneumatic control fully automatic jumbo roll loading system helps in placing the material jumbo roll on the unwind stand.

This allows for fast jumbo roll placement not requiring heavy work or extra personnel.

It only needs to put the air-expanding shaft through the material jumbo roll. Then align the air expanding shaft’s 2 sides with the unwind stand’s clamps. Lastly, press the control button, and the jumbo roll will automatically rise to the appropriate unwinding height.

The web feeding section has been optimized to make your work easier. It also cuts your costs associated with extra personnel.

After the jumbo roll is released, it comes to material feeding. This also means the start of material transmission.

Our sandwich paper cutting machine is also equipped with a web guide system. The web guide system ensures that the paper roll does not deviate. If the paper roll deviates, it will affect the final slitting and cross-cutting accuracy.

In order to avoid material deviation, our roll to sheet cutting machine is equipped with a NIP roller. The NIP roller is an important component especially when it comes to sheeting thin paper. It acts like a clamp, holding the paper sheet and leading it into the sheeting chamber.

The NIP roller is made of rubber that allows it to grip thin paper sheets easily. Our roll to sheet cutting machine is equipped with the latest NIP rollers. They are advantageous especially when you require high quality paper sheets.

Slitting Section

The web guide system ensures that the jumbo paper roll enters the slitting section uniformly. The jumbo paper sheet can enter the slitting knives uniformly. Consequently, the slitting accuracy can be controlled within 0.15mm.

The slitting of the jumbo paper sheet starts once it enters the slitting knives.

The slitting knives consist of round disc cutters. Here, the parent roll is slitted into the required rows. You should ensure that the round disc cutters are set to cut the required widths. Some of the common cutting measurements of roll to sheet cutting machine include A2, A3, A4, and A5 sizes.

It is important to note that the slitting section primarily slits the jumbo paper sheets into the required widths.

The slitting section of the paper roll sheeter machine is primarily made up of an upper and lower round knife. The upper round knife is pressed against the lower round knife, and shear-type cutting is used to remove the material.

The shear type of cutting is preferable for cutting out edges. It also gives a clean cut for the paper sheets.

Sheet cutting Section

The sheet cutting section is where the slitted rows of paper sheets are cut into the required lengths. The cutting section and the slitting sections are basically integrated. They work together to produce the required paper sheets according to your demand.

The sheet cutting section can use either the shear-type cutting method or the large cross-cutter.

As stated, earlier shear cutting involves pressing the upper round disc cutter against the lower round disc cutter. The material is then cut off by shear-type cutting.

This shear-type cutting method has great strength, fast cutting speed, the material edges after cutting are very neat and with no burrs.

We also have a butcher paper sheet machine that uses a large cross cutter. The large cross cutter works by moving up and down, then cross-cutting is realized.

The cross cutters are equipped with a bidirectional linear motion guide and slide nut for the crosscutting blade. This is in order to ensure that the cross-cutting knife moves up and down smoothly and without obstruction.

The slitting and cutting of the paper sheets are a continuous process. When the incoming material is slit, it will continue to go to the next cross-cutting device.

Control Section

The control section of our roll to sheet cutting machine is centralized. It is equipped with a Wein view touch screen HMI. Here, all the parameters can be set up and displayed on the screen.it can be used in a number of ways such as controlling the frequency inverter, material feeding, and the electromagnetic brake system.

The control system of the roll sheeter machine can also be used to diagnose problems with the machine. We use the latest technology when it comes to controlling systems.

Automatic Stacking System

We can customize your kebab paper roll sheeter machine to include an automatic stacking system.

This is usually an automatic stacking table that can be integrated with your roll to sheet cutting machine. The stacking table can sort and stack 500 sheets of A4, A5 paper or other material. It can then push it from the paper sheeter machine to the sheet cutter’s side to the packer, which is very convenient.

The stacking table also saves you on costs associated with hiring packaging workers.

Waste Discharging

Our paper sheet for the baking sheeter machine is equipped with a special waste outlet. For the waste outlet to work perfectly, you need to connect the hose to the waste outlet. All the waste edges pass through the hose with the siphon fan’s huge vacuum suction.

The air blower installed on our roll to sheet machine is specially adapted for thinner materials. This means that your machine will remain clean throughout the production process.

How Do I Choose the Right Material for My Roll to Sheet Cutting Machine?

There are a number of materials you can use with your roll to sheet cutting machine. But before choosing the right material to use for your paper sheeter machine.

You should put the following into consideration:

• The type of material you need for sheeting. The material can range from food packaging paper sheets, tape, paper film, and aluminum foil. Other material may include paper and office copier paper sheets.
• You should consider the thickness of the jumbo paper roll. This includes its width and diameter.
• You should also consider the end use of the produced paper sheets. This will enable you to guide you on the best paper sheeter machine to use and adjust the configurations.
• You should consider the finished paper sheet’s maximum and minimum dimensions.

After putting the above into consideration, then you can choose the best materials to use with your automatic paper roll to sheet cutting machine. Some of the materials you can cut with our roll to sheet cutting machine include:

• Newspaper
• Offset copy paper
• Kraft paper
• Paper cardboard
• Sticker adhesive paper (scissor type)
• Some plastic film
• Plastic sheet board (scissor type)
• A1, A2, A3, A4, and A5 Paper

There is a lot to learn about the right paper to use with your roll sheeter machine. This is because different paper materials are used for different things or activities.

There is paper for wrapping, writing on, packaging, building, and such like uses. Because different customers request for different papers, we have optimized our roll sheeter machines.

You can configure our paper sheeter for the food cutting machine to cut different sizes of paper.

This is very important because you will have one machine for doing different sizes of paper.

Most of the popular types of paper are wrapping paper rolls. With the improvement in living levels, wrapping paper is available everywhere. For example, Mexican rolls, Turkish rolls, hamburgers, and other fresh foods wrappings.

Other types of paper types that you can get in the market include:

• A0 Sheet
• A1 sheets
• A1 Sheets of Cardboard
• Sandwich Paper Wrap Sheets
• Sandwich Wrap Paper Custom
• Sandwich Wrap Paper Foil
• Sandwich Wrap Paper Roll
• Sandwich Wrap Paper with Logo
• A3 Sheets of Card
• A4 Paper Business
• A5 Sheet of Paper
• Kraft Paper Sheets
• Kraft Paper Sheets for Printing
• Kraft Paper Sheets for Packaging
• Paperboard Sheets
• White Paperboard Sheets
• Paper Sheet for Baking

Paper sheet for baking is also available in different types. These include

• Ordinary greaseproof paper
• Transcluent Paper
• Food grade silicone oil paper
• Poster Sheets Paper
• Plastic Poster Sheets
• Blank Poster Sheets
• Custom Butcher Paper Sheets
• Black Butcher Paper Sheets
• Brown Butcher Paper Sheets
• Peach Butcher Paper Sheets

There are so many types of paper you can use with our roll to sheet cutting machine. Note that most of the paper material can be procured in jumbo paper rolls.

You can then use our paper roll sheeter machine in cutting them to the required sizes. You can follow this link to learn more on the paper material that you will require to use with our paper roll sheet machine.

What Considerations Should I Put in Mind When Choosing a Sandwich Paper Cutting Machine?

Some of the considerations that you should put in mind when choosing a sandwich paper cutting machine include;

After-sale services

You should consider the after-sale services that the manufacturer offers for the machine. These may include services such as installation, warranty, and maintenance.

This will enable you to follow up with us when the paper roll sheeter machine breaks down. A new machine should have a warranty to give you confidence in buying the machine.

At Jota Machinery, all our roll to sheet cutting machines come with a warranty. The warranty ranges in duration depending on the type and price of the machine. We also offer installation and maintenance services. You should liaise with us for arrangements on how to get the services.

The type of cutting method

Different paper roll sheeter machines work differently. We have two distinct types of sheeting machines. The sheeting machines vary depending on the cutting style of the paper roll sheeter machine.

You should put into consideration whether to buy a scissor type sheeter machine or a rotary sheeter machine.  The two may defer a bit in the pricing and also for the material used with the machines.

Price

The price of the paper sheets for food cutting machine is also something you should consider. Different roll sheeter machines have different prices. Choose the paper sheeter machine that suits your budget. At Jota Machinery, we offer discounts on large machine purchases. Our machines are generally fairly priced.

Technology

When buying your roll to sheet cutting machine, consider the level of technology integration. Roll to sheet cutting machines with the latest technology will cost a little bit higher than those with outdated technology.

All our paper roll to sheet cutting machines come with a modern control system. You will be able to control the machine through a touch screen. It processes all the parameters of your paper sheet for the food cutting machine.

Supplier location

You also have to consider the location of the supplier. Shipping costs are often affected by location. This is one thing you have to consider, and some locations are related to the machine industry belt, quality and price will be competitive.

Performance and use of the machine

You should consider the performance of your kebab paper roll sheeter machine. For instance, do you need a machine with 350 cuts/min or one with 120 cuts/per min? You can also consider the level of technology and speed of the roll sheeter machine.

The uses of the machine are also important considerations. If it is for heavy use, you will need a bigger roll sheeter machine.

The nature of the material and the number of products produced will also affect the type of machine that you buy.

What should I consider before beginning unwinding the paper jumbo roll for the kebab paper roll sheeter machine?

There are several items that you are supposed to check. Some of the things you must check are as follow:

• First, check the controls and all the switches of the machine. Ensure that you make a test run to check that all the components are working. If the kebab paper roll cutting machine has a touch screen, ensure it responds to commands.
• Make a 360-degree check on your kebab paper roll cutting machine to ensure every component is intact. This is vital in ensuring that the machine works properly. It also serves to avoid accidents. Be sure to remove any unwanted items or tools on the paper slitter.
• You must check the pneumatic cutters and adjust them accordingly. These must be positioned in a way that corresponds to the angle and size of the jumbo paper roll. The round disc cutters should also correspond to the final paper sheeter sizes.
• Ensure that the tension of the parent roll is adjusted accordingly. The parent roll should have the required tension to avoid poor slitting and sheeting. Poorly cut paper sheets lead to poor quality of the kebab paper sheets.
• Ensure that the round sheeting cutter sharpness is ideal for the material to be sheeted. Blunt round disc cutters will damage your paper sheets.
• Check the whole kebab paper roll cutting machine line to ensure there are no paper sheets left from previous tasks. Set the paper roll slitter machines to your exact specifications.

After going through the above steps, you can then insert the jumbo paper roll for sheeting. This is achieved by feeding the jumbo paper roll into the kebab paper roll sheeter machine.

Why Choose Jota Machinery for My Hot Dog Paper Roll Sheeter Machine?

There are many reasons why you should choose Jota Machinery for all your food paper roll sheeter machine needs. Some of these reasons include:

Efficiency

Jota Machinery food paper roll sheeter machine will ensure efficiency in your paper mill business. Our hot dog paper sheeter machine is efficient and reduces lead times on your orders. You will be able to meet your customer’s orders without much hurdle.

Automated

At Jota Machinery, we produce high quality hot dog paper roll sheeter machines.  Be sure of the highest quality machines that will save you on your operations cost. Our hot dog paper sheeter machines are equipped with a dashboard panel control that is easy and simple to use.

The absence of a touch screen on the dashboard reduces the likelihood of a malfunction. We can customize a fully automated control panel with a touch screen if you require one. Visit our website for additional information about our roll-to-sheet cutting machine.

Customization

At Jota Machinery, we are flexible when it comes to slitter paper designs.

We will accept you customized designs and integrate them with our ideas. If you need a scissor-type paper sheeter machine, we will make it to your exact specifications.

We believe we are an integral part of your business. The success of your business is our business.

Feel free to contact us for your customized order placement.

Cost saving

Our hot dog paper roll sheeter machine will help you save on costs associated with operations. Because our food paper roll sheeter machine is automated, you will require a few operators for the machine.

Latest Technology

At Jota Machinery, we ensure that we use the latest technology in the manufacture of paper roll sheeter machines. From the unwinding, the slitting, sheeting, and stacking processes, we ensure technology is applied throughout.

Easy To Operate Slitter Rewinder Machines

At Jota Machinery, we ensure that all our sandwich paper cutting machine are easy to operate. You will need a few hours to understand the operation of our roll to sheet cutting.

Our sales agents and technicians are available to guide you throughout the installation process. We will also train you on the operation of the roll to sheet cutting machine. Feel free to call us in case you need any assistance.

Wide range of machinery

Having a food paper roll sheeter machine in your business will open opportunities for more machinery for your workshop. We offer a number of paper sheeter machineries including:

• Hamburger Paper Sheeting Machine
• Double Layers Sandwich Paper Sheeting Machine Roll to Sheet Cutting machine
• A3 A4 A5 Paper Sheeting Machine
• Automatic Paper Roll to Sheet Cutting Machine
• High-Speed Paper Roll to Sheeting Machine
• High-Speed Rotary Paper Sheeting Machine Roll Paper Cutting Machine Sheet Cutting Machine
• High-Speed Servo Controlled Paper Roll Rotary Sheeter Machine With 2 Rolls
• Rolls High-Speed Rotary Paper Sheeting Machine

You can visit our website to view more of our product portfolio.

Should I Consider the Tension and Material Web Guide for My Butcher Paper Sheet Cutting Machine?

Web Guide

A web guide is essential in most unwound stands thus as it keeps the web centered on the machine. In order to avoid material deviation, our paper roll cutting machine is equipped with a web guide system.

Normally, the web guide is fixed to suit a full range of widths for your products.

The web guide system is mainly composed of an ultrasonic edge sensor and a linear guide. It also consists of a precision linear actuator and an edge position controller. These serve to guide the web into the slitter head.

The adjustable side is attached onto the frame of the paper sheeter machine. The web guide requires it to be manually or automatically set for every product according to the width you want.

Currently, we have several edge sensors in the market which do not need manual adjustment. In the case of different web widths within certain ranges, web guides reduce the changeover time.

We encourage you to choose machines with the latest web guides. This reduces waste by eliminating operator error in web guide settings.

Web Tension

Any material that is continuously wound onto a roll or reel is referred to as web. Included in this category are paper, plastic, film, filament, textile, cable, and metal.

The tension involved in the winding and unwinding of a continuous web of material during a machine process. The tension of the web is the most crucial factor in ensuring that the web rolls evenly and is processed properly.

The winding or unwinding tension is the constant, quantifiable force that the web must withstand throughout the production process. When using a paper roll sheeter machine to unwind a paper jumbo roll, tension occurs.

During the unwinding process, tension is the force that elongates or stretches the material as it is pulled or transported.

The extent to which the material is stretched must be carefully regulated. It should be kept to a minimum and distributed evenly throughout the procedure. Therefore, to control web elongation, winding tension must be regulated.

Web tension control is necessary for a couple of reasons including:

• It is necessary to improve and ensure the flow of material during machine speed changes.
• It is necessary for compensating for directional variations of the web as it is being unwounded.

Our automatic paper roll to sheet cutting machine is equipped with tension-sensing rollers and tension indicators. These serve to minimize the chances of your jumbo roll tearing.  The web tension sensors can automatically measure and make necessary adjustments during the process.

Web tension is defined and measured by the force per unit width, or simply, the unit tension of the material. Web tension is determined by either of the following:

• Material thickness
• The type of material being processed
• The process the material undergoes in slitting or sheeting.
• The roll sheeter machine type (either automatic or manual web tension control system).

The correct unwinding tension and web tension controls relate directly to production efficiency. Too much tension may cause the material to try and return to its original form.

This distorts the finished roll. In all cases, without correct web tension control, the paper roll may be too soft from lack of proper tension control. This can lead to poor paper sheets and uneven rows.

After Buying My Hamburger Paper Roll Sheeter Machine, What Other Services Should I Expect from You?

After sale support

When purchasing a roll to sheet cutting machine, it is important to find a brand that is reputable like Jota Machinery. This is because such brands will be able to offer you technical support during the process of installation.

Also, you should be able to get support in training your employees on the usage of the paper sheeter machine. Therefore, it is important to seek clarification that the manufacturer will offer you the required support.

This is because technical support will be very important in the optimal functioning of the roll to sheet cutting machine.

We do deliver our sandwich paper cutting machine accompanied with manuals.

These will give you a step-by-step guide on how to use the paper roll sheeter machine. Also, if you do not understand how to go about the installation and staff training process, you can contact us.

Installation

Jota Machinery technicians will assist you in the installation procedure of the roll sheeter machine and make sure that it is running successfully. This can be achieved by contacting us for the services after purchasing our machine. We will be able to send our technician to your location.

It is important to be aware of the installation procedure as it is not a very complex process.

The installation of the roll to sheet cutting machine entails a series of steps from making of the base up to a completed stacking machine. Our professional Jota Machinery engineers will give you a clear guidance of the steps entailed.

We will elaborate the entire process until your engineers on the ground understands the entire process.

Once you have received the paper sheet for the baking sheeter machine, you will need to unload it. Inspect to ascertain that everything is in place.

Establish if all the parts and components of the paper sheet for the baking sheeter machine are in place. In case you see any mis-faults in the paper sheet for the baking sheeter machine, you should contact us for assistance.

You may then connect the electric wires of the paper roll sheeter machine and power it on. Ascertain if the paper roll sheeter machine is working at both high and low speeds and it is running in a stable manner.

If you detect any abnormal situation with the roll sheeter machine, switch off the power and analyze the machine. In case you do not detect the fault, kindly reach out to us and we will offer the necessary help.

Jota Machinery always strives to make sure that our customer’s needs are met efficiently. We ship the hamburger paper roll sheeter machine as a whole set or as parts which you will need to assemble.

Shipment And Regulation Assistance

We will assist you through your order and delivery process. We will also guide you from the order placement process to the delivery to your factory.

Feel free to call our customer care center for any inquiries regarding your order processing. If you are not sure of certain payments contact us. You can also seek help from professional freight forwarders or shipping agents.

We will also guide you on the extra charges that you might come across on your shipments. Some of these costs include but not limited to:

• The taxes that will be charged on your paper roll winding machine.
• The warehouse charges.
• Insurance charges for your on-transit cargo.
• Customs and duties.
• Payment transactions cost.
• Other unforeseen charges.

Exercise duties payable are mainly incorporated in the final price of our automatic paper roll to sheet cutting machine.

We work hard to ensure that there are no hidden charges for your purchases.

We encourage you to pick your hamburger paper roll sheeter machine immediately after manufacturing. This will avoid you incurring extra charges. These charges include cost of storage and warehousing.

We will also advise you on the best way to go about your shipping and taxes. Sometimes problems might occur from the taxes you need to pay here in China and those you need to pay in your home country.

As much as we will offer guidance, it is important to seek clarification on the same from local authorities.

Maintenance

Maintenance is an important aspect when it comes to butcher paper sheet machines. We strive to produce quality butcher paper sheets machines.

This ensures that you need minimal maintenance on our machines. It also means that our butcher paper sheets machine experience minimum breakdowns.

Every machine that we sell at Jota Machinery comes with a maintenance manual. The maintenance manual indicates the procedures that you should follow.

It is important that you adhere to the latter. This will ensure that you minimize injuries as a result of not following safety protocols.

If you are not sure of how to undertake certain maintenance issues, kindly contact us for directions. It is highly recommended not to dismantle your paper roll sheeter machine. Only professional technicians are allowed to undertake such maintenance procedures.

Spare Parts

At Jota Machinery, we ensure that our hot dog paper roll to sheeter cutting machine is easily available. It is recommended that you use the original parts from Jota Machinery. This will ensure that the replaced parts and components are compatible with your roll sheeter machine.

Jota Machinery always strives to make sure that our customer’s needs are met efficiently. We ship the paper roll to sheet cutting machine as a whole set or as parts which you will need to assemble.

Some of the parts and components of the hot dog paper roll to sheeter cutting machine include:

• Round disc cutters
• Blades
• Shifting cluster
• Drive shaft cluster
• Drive shaft gear.
• Web guides
• Braking system
• Unwinding shafts
• Round disc cutter arms
• Cluster for changing the skid plate
• Rollers
• Belting press

In order to let you know more about we Jota company, please watch the following video for reference.

We Jota could also supply the following related machines, if you are also interested in double layers sandwich paper roll to sheet cutting machine ,please feel free to send us an inquiry:

1. Hot Melt Thermoplastic CFRP CFRTP Prepreg Manufacturing Machine
2. Fully Automatic Thermal Paper Roll Slitting Packing Machine
3. Fully Automatic Toilet Paper Maker
4. Automatic Facial Tissue Making Machine
5. Plastic Film, Fabric, Aluminum Foil Slitting Rewinding Machine
6. Paper Tube Making Machine
7. CFRP CFRTP FRP Prepreg Slitter
8. Paper Drinking Straws Machine
9. Label Die Cutting Machine
10. Flexo Printing Machine
11. Cardboard Tube Cutting Machine